crashtest

2010 / Porsche

2010 Porsche 911 Turbo

Safety ratings

2010 Porsche 911 Turbo 2-DR w/SAB

Not ratedOverall
Not ratedFrontal crash
Not ratedSide crash
Not ratedSide pole
Not ratedRollover
  • Lane departure warningNo
  • Forward collision warningNo
  • Electronic stability controlStandard

Crash test videos & photos

No public crash-test footage is available for this vehicle.

Recalls (3)

  • EQUIPMENTCampaign 11E021000 · 17/05/2011

    PORSCHE IS RECALLING CERTAIN AFTERMARKET CENTER WHEEL MOUNTING KITS EQUIPPED WITH CENTER WHEEL LOCK AND HUB ASSEMBLIES BEARING THE TORQUE SPECIFICATION INSCRIPTION "500 NM" ON THE CENTER BOLT SOLD FOR USE ON MODEL YEAR 2010 AND 2011 PORSCHE 911 TURBO VEHICLES. SHOULD VEHICLES EQUIPPED WITH THE AFFECTED KITS BE OPERATED UNDER RACING CONDITIONS, THERE IS A POSSIBILITY THAT THE WHEEL RETENTION SYSTEM MAY FAIL.

    Risk: IF THE WHEEL RETENTION FAILS, A VEHICLE CRASH COULD OCCUR.

    Fix: PORSCHE WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE CENTER BOLTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 28, 2011. OWNERS MAY CONTACT PORSCHE AT 1-800-PORSCHE (1-800-767-7243.)

  • SUSPENSION:FRONT:MACPHERSON STRUTCampaign 20E091000 · 11/12/2020

    Ohlins USA, Inc (Ohlins) is recalling certain Front Struts, part number POS 5N20. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation on 2005-2012 Porsche 911 Carrera 4 and 4S (generation 997), and 2006-2013 Porsche 911 Turbo / Turbo S (generation 997). The pin of the strut may experience excessive stress during maximum steering, possibly resulting breakage of the pin.

    Risk: If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.

    Fix: Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (POZ MN02 or POZ MN05) will receive replacement front struts (POS 5N20 or POS 5N21 - These parts are interchangeable), along with new top mount interface solutions, free of charge. The recall began December 22, 2020. Owners may contact Ohlins customer service at 1-800-336-9029.

  • WHEELS:LUGS/NUTS/BOLTS/STUDSCampaign 11V285000 · 10/06/2011

    PORSCHE IS RECALLING CERTAIN MODEL YEAR 2010-2011, 911 TURBO; TURBO S, 911 GT3, GT3 RS AND GT2 RS HIGH PERFORMANCE VEHICLES, MANUFACTURED FROM MAY 18, 2009 THROUGH SEPTEMBER 17, 2010, AND EQUIPPED WITH CENTER LOCKING HUB AND WHEEL ASSEMBLIES. OVER TIME THE HUBS CAN WEAR PREMATURELY.

    Risk: AS THE HUBS WEAR, THE WHEELS COULD LOOSEN, INCREASING THE RISK OF A CRASH.

    Fix: DEALERS WILL REPLACE THE CENTRAL LOCKING HUBS AND WHEELS WITH AN IMPROVED DESIGN, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 28, 2011. OWNERS MAY CONTACT PORSCHE AT 1-800-767-7243.

Owner complaints

1
Complaints
0
Crashes reported
0
Fires reported
0
Injuries
0
Deaths

Most-reported areas

  • ENGINE1
Read individual complaints (1 most recent)

These are unverified consumer reports filed with NHTSA, shown as submitted.

  • 01/12/2023· ENGINE

    Last year my 2010 Porsche 911 GT3RS experienced a catastrophic engine failure while on the road. I had to shut off the car in the middle of a 4-lane highway and try to coast to a stop while navigating around much faster traffic risking my safety and the safety of other drivers. There was no warning prior to the failure. Just a sudden bang, followed by shaking and rattling noise. Once the car was towed to an automotive repair shop, the engine was taken apart and it was concluded that a piece from the intake broke off and got swallowed by the engine while on the road. I have images and documentation of the damage and the parts are available for inspection. The trouble is that the failed piece of the intake was part of a manufacturer recall to fix that exact issue back in 2013. After the findings of the repair shop I contacted Porsche Cars North America. The car was subsequently brought in to a Porsche dealer for inspection, where I was told multiple times that a failed recalled part would be covered by the manufacturer's good will repair policy. After 4 months of back and forth with the headquarters I was told that Porsche would not be responsible. I have spoken to other owners of this exact model cars and several of them have confirmed that their replacement intakes have failed, in some cases causing the engine to completely seize while on the road. Thankfully that did not happen to me.