crashtest

2009 / Mazda

2009 Mazda Tribute Hybrid

Safety ratings

2009 Mazda Tribute Hybrid 4-DR. w/SAB

Not ratedOverall
Not ratedFrontal crash
Not ratedSide crash
Not ratedSide pole
3/5Rollover
Frontal, driver: 5★Frontal, passenger: 5★Side, driver: 5★Side, rear passenger: 5★Rollover risk: 20.4%
  • Lane departure warningNo
  • Forward collision warningNo
  • Electronic stability controlStandard

Crash test videos & photos

No public crash-test footage is available for this vehicle.

Recalls (2)

  • STEERING:ELECTRIC POWER ASSIST SYSTEMCampaign 14V282000 · 29/05/2014

    Mazda North American Operations (Mazda) is recalling certain model year 2008-2011 Tribute vehicles manufactured October 5, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist.

    Risk: If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.

    Fix: Mazda will notify owners and dealers will update the software for the power steering control module (PSCM) and the instrument cluster module, free of charge. If a vehicle shows a history of a loss of the torque sensor signal or fault codes relating to the PSCM when the vehicle is brought in for the recall remedy, the affected components will be replaced, free of charge. The recall began in July 2014. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 7614E.

  • SUSPENSION:FRONT:WHEEL BEARINGCampaign 15E045000 · 03/06/2015

    The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.

    Risk: Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.

    Fix: Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.

Owner complaints

1
Complaints
0
Crashes reported
0
Fires reported
0
Injuries
0
Deaths

Most-reported areas

  • ELECTRICAL SYSTEM1
  • ELECTRONIC STABILITY CONTROL (ESC)1
Read individual complaints (1 most recent)

These are unverified consumer reports filed with NHTSA, shown as submitted.

  • 02/20/2019· ELECTRICAL SYSTEM,ELECTRONIC STABILITY CONTROL (ESC)

    PARKED VEHICLE IN GARAGE AFTER DRIVING, NEXT MORNING THE BATTERY WAS FULLY CHARGED BUT WOULD NOT TRY TO START WITH A STOP SAFELY NOW WARNING DISPLAYED...THIS HAS HAPPENED THREE TIMES NOW - SPENT $600 AND A TOW BILL FIRST TIME. FORD SAID THEY REPLACED A LEAKING THERMOSTAT AND REPROGRAMMED IT (WHICH I DO NOT BELIEVE). NEXT MORNING, SAME PROBLEM BUT LATER (3 DAYS LATER) IT STARTED, DROVE IT SEVERAL TIMES, NEXT MORNING IT WOULD NOT TRY TO START AGAIN. TOTALLY BROKE DOWN NOW WITH A FULLY CHARGED BATTERY. I THINK IT IS A FAULTY WIRING IN THE BATTERY HARNESS NOT COMMUNICATING WITH THE HYBRID BATTERY TO START AS I HAVE READ ABOUT THIS PROBLEM ON THE INTERNET WITH RECALLS FOR OTHER FORD HYBRID VEHICLES THAT TELL THE SAME STORY. PLEASE ISSUE ME A RECALL FOR THIS VEHICLE; WITHOUT IT, THE VEHICLE IS A TOTAL LOSS TO ME AS OTHERS GET RECALLS FOR THIS VERY FRUSTRATING PROBLEM THAT IS NO FAULT OF MY OWN.